Cutting pavers (5.0)

I used this blade to cut pavers for
a curved planting bed and it worked
very well; the blade was sturdy
and sharp and made clean cuts

Great Value Saw Blade (5.0)

I purchased this blade to do a backyard patio project. I checked the reviews and chose this blade for the reviews and also the price. I have cut over one hundred concrete bricks and also some 5" thick retaining wall blocks. This blade cut all of them the same as the first cut that I made. The diamond edge of the blade is the same as when I started indicating that it will go a lot more. I cut all of my bricks dry as I used the saw in the backyard. I was careful not to overheat the blade and I would recommend doing it the same way. Otherwise, I give this blade a 5 star rating for the average homeowner.

Better than a blade twice the price (5.0)

I built an 8' tall waterfall from natural rock and cut with this blade daily for a week. It was still working well, but I thought it would be wise to get a new blade from my local tile store "just in case". The new blade was more than twice the price, and advertised as appropriate for porcelain tile and even granite. Naturally, I installed the new blade immediately and after a day of cutting...it was toast. I reinstalled the old blade and was surprised to find that it was cutting like new, and continued to do so for another week. As the blade wears down, new diamonds are continually being exposed on the surface, maintaining its effectiveness. I couldn't be more impressed.

Extreme Value (5.0)

I had the saw and the pile of 60mm thick pavers to be cut (an 800 sq. ft. project total) but alas no blade. None locally, anywhere, and that included the professional places, not just the Big Boxes with shamelessly undertrained personnel. I chanced upon this blade on Amazon and, not knowing the potential life of one blade, bought two. I completed the project with the first blade still cutting as if it were right out of the box.

Use care and patience and plenty of water in your cutting and, I trust, you will experience the same delight in your money being very well spent on this quality blade.

At the time I was shopping online there were, as I recall, 10 reviews, all positive. I can even allow the 10% grumpage standard in reviews, but this was overwhelming. Shipping was exactly as promised. This story has all happy endings, and I delight in walking on my pavers and admiring my work.

You get what you paid for. (3.0)

I used this blade to cut 2.5-inch thick concrete pavers on a wet table saw.

This blade does not last past 100 feet of cutting. By the way, the paver size is 6" X 9" and I am not a paver contractor - just a weekend DIY.

So, is it normal for this amount of cut? how much should I expect it to last?

Diamond saw blade (5.0)

I am using this blade in a skil saw to cut concrete and cement board. This blade is directional, check the arrow. The diamond knockout to 5/8" arbor is weak. The pictured item shows a piece that fills the diamond knockout. The one I received was round OD and ID. Cuts great.

Can't Beat The Price!!!! (5.0)

I needed to cut down granite countertop for use in my work shop. Since this was a piece left over from a kitchen remodel, I didn't think I could justify the cost of a name brand blade. Perusing Amazon, I found this and another diamond blade from Coast-to-Coast. Given the price, I felt I could not go wrong and I didn't. The blade cut without a hitch! Perhaps not the best blades for long term use BUT, if you have a simple, one time job, these blades are highly recommended!

Value Diamond Blade (5.0)

I am building a retaining wall and was going through the composite masonary blades . . . decided to go to the Home Depot for a diamond blade.$40.00+ Went on line and bought this blade on eBay. Works fantastic! It will cut cement blocks like they are butter.

5 Stars for this 7-inch Diamond blade (5.0)

I needed a way to trim square concrete flagstone blocks for the edge of a patio, and was unwilling to spend $65 for a diamond saw for a few cuts. I saw this product and decided to risk the purchase price, and I can't tell you how delighted I am. The blade cut through the 3-inch concrete like it was pine. Of course the dust generated is another story. I highly recommend this product for your circular saw, but also recommend using a paint mask and cutting outside. :-))

Great for glass (5.0)

I use theese bits to drill holes in glass. They work quickly and produce fine holes with no chips.

Doesn't fit a Dremel (1.0)

Caution: If you're looking for something that fits a Dremel, these won't. The shank is 1/4". Dremel doesn't seem to have a chuck kit that fits anything that large. :(

Excellent Bits.... (5.0)

I was a bit weary when I purchased these, as I too felt they may be a 'cheap' product with little life in them - I was wrong! These diamond bits are a gem in themselves! I have drilled holes in dozens of bottles & other glass items. I use the smallest size most & have never been disappointed. Learn your drill & your glass, keep it wet & lift your bit often so that your glass doesn't get too hot (causing it to crack/break) and you will love these bits! I couldn't be happier with them. I have used them on the most delicate glass, to some pretty hardy glass and they cut through like the glass is butter.
Very nice product!

great bits for the money (5.0)

I was unsure of these bits before I bought them, based purely on the price. I was unsure of these bits when I received them and it looked like they were poorly dipped in glitter glue. I was completely sold on how well these worked when the 1/4" powered through the wine bottle I was working on with ease, no chipping or cracking...For the money I'm not sure you can get any better

cuts easily (5.0)

only used the 1/4 in and 1/2 inch, both worked great, keep cool with water and make a wood template to hold bit, and cut away.